QuoteMyAnything

Plumbing Cost Guide: Leaks, Drains, Water Heaters and Repipes

Published October 27, 2026 · QuoteMyAnything

Plumbing problems rarely wait for a good time, and it’s hard to know whether a price is fair when water is on the floor. This guide shows how our free plumbing cost calculator builds its ballpark for four common jobs, what moves the price, and how to compare quotes from plumbers.

Ballpark ranges from our plumbing cost calculator

These figures come straight from the QuoteMyAnything plumbing cost calculator. It starts with a base amount for the type of job, multiplies it by how serious the problem is, then adds any add-ons you choose. The figures are the same for every ZIP code, so use them as a starting budget.

Prices shown are estimates. Actual quotes vary by location and job.

JobMinorMajorEmergency / flooding
Leak / repair$180$270$324
Drain cleaning$150$225$270
Water heater install$1,400$2,100$2,520
Repipe$4,500$6,750$8,100

Add-ons in the calculator are flat amounts added on top:

Add-onAdded to the estimate
Camera inspection+$120
Fixture install+$150
Sump pump+$400
Same-day+$150

Example: a minor drain cleaning is $150 in the calculator; add a camera inspection and it’s $270. An emergency leak with same-day service selected comes out to $474.

Try the plumbing cost calculator →

What drives your plumbing cost

FactorWhy it changes the priceWhat to ask for in writing
Type of jobA drain cleaning and a whole-house repipe are very different jobs. It’s the base of the calculator’s estimate.A clear description of the work
SeverityMajor problems and active flooding take more time and urgency. The calculator raises the estimate for each step up.What the plumber found and why it’s rated that way
TimingSame-day or after-hours work often costs more.Any trip, after-hours or emergency fee
AccessPipes behind walls, under slabs or in tight crawlspaces take longer to reach.Whether opening and patching walls or floors is included
Parts and fixturesWater heaters, fixtures and sump pumps vary by model.Brand, model and size of anything installed
DiagnosisA camera inspection shows what’s inside a drain line before you pay for bigger work.Camera footage or photos of the problem
PermitsSome jobs, such as water heaters or repipes, may need a permit depending on where you live.Who pulls the permit and whether it’s in the price

Questions to ask every plumber

  1. Is your price a flat rate or hourly, and is there a trip or diagnostic fee?
  2. What exactly is causing the problem, and can you show me?
  3. Is there a cheaper repair, or does this really need a replacement?
  4. What brand and model are you installing, and why that one?
  5. Does this job need a permit, and will you pull it?
  6. Can I see your plumbing license and proof of insurance?
  7. What warranty covers the parts and your labor?
  8. Does the price include haul-away of old equipment and cleanup?

How to compare plumbing quotes

When DIY makes sense, and when it doesn’t

Some small jobs are reasonable for a handy homeowner: plunging a single slow drain, cleaning a faucet aerator or showerhead, or replacing a toilet flapper. It also pays to know where your main water shutoff is before you need it. Leave gas water heaters, anything involving gas lines, repipes, sewer line problems and work that may need a permit to a licensed plumber.

Request a free plumbing quote

Run your numbers in the plumbing cost calculator, then request a free quote. In the Houston area, start on our Houston plumbing quotes page. Requests are free. We’re still adding local pros, so if we have a pro in your area we’ll connect you, and if not we’ll email you to let you know.

Request plumbing quotes in Houston →

FAQs

How much does it cost to fix a leak?

In our plumbing cost calculator, a leak or repair runs from $180 for a minor job to $324 for an emergency with flooding, before add-ons. Your final price depends on where the leak is and how hard it is to reach.

How much does a water heater install cost?

Our plumbing cost calculator puts a water heater install at $1,400 for a minor job and up to $2,520 for an emergency. The size, fuel type and model you choose can change a real quote.

How much does it cost to repipe a house?

In our plumbing cost calculator, a repipe runs from $4,500 to $8,100 depending on severity, before add-ons. Home size, pipe material and wall access all affect the final quote.

How much does drain cleaning cost?

In our plumbing cost calculator, drain cleaning runs from $150 for a minor clog to $270 for emergency / flooding, before add-ons.

Are the calculator prices local to my city?

No. The plumbing cost calculator uses the same figures for every ZIP code. Use it as a starting budget, then compare any written quotes you get.

This article is general information, not professional advice. Cost calculator figures are ballpark estimates, not quotes; your final price comes from the pro you hire.